Date/Time Configuration" Page; Users" Page - Bosch Rexroth IndraControl S67-S3-BK-DI8-M8 Application Description

56/139 Bosch Rexroth AG
Web-Based Management (WBM)
8.9

"Date/Time Configuration" Page

8.10

"Users" Page

Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
On this page, the real-time clock is configured.
Fig. 8-8: "Date/Time Configuration" page
Procedure:
1. To confirm the entries, click SUBMIT.
2. To clear the entries, click RESET.
3. The entries are not active until the software has been reset (see
8.11 "Administration Page" on page
bus coupler can be switched off and on again.
The following table explains the parameters listed on the site:
Configuration data Description
Time on device Set the time here.
Date (YYYY-MM-DD) Set the date here.
Time zone (+/- hour:mi‐ Set the time zone here.
nute)
Daylight savings time If the checkbox is selected, the field bus coupler is set to
daylight savings time
Display Mode
12-hour clock Switching between 12-hour and 24-hour time display
Tab. 8-8: Describing parameters of the "Date/Time Configuration" page
On this page, the passwords of the users "admin", "user" and "guest" can be
changed.
DOK-CONTRL-S67S3BKDI8*-AP03-EN-P
57). The power supply of the field
chapter