Bosch Rexroth IndraControl S67-S3-BK-DI8-M8 Application Description page 99

DOK-CONTRL-S67S3BKDI8*-AP03-EN-P
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
Diagnostic event
Error (C1D), Warning (C2D)
...
generated IDN/S-0-0095 „Diagnosis message"
generated IDN/S-0-0390 „Diagnostic number"
IDN/S-0-1305 „sercos time"
generated IDN/S-0-1500.0.32 „IO Diagnosis Message"
Fig. 9-7: Generation of acyclic diagnostic parameters
The following table displays the status codes of the FSP_IO for the diagnostic
class warning (C2D) that are supported by the S67-S3-BK-DI8-M8 sercos
field bus coupler:
Status Name
code
0x1000 General error
0x2300 Current on the
device output side
0x2340 Short circuit (device
output side)
0x2344 Output overload
0x2350 Open circuit
0x2360 Wire break
0x3410 Sensor supply
0x3420 Actuator supply
0x4200 Device temperature Overtemperature on an input or output channel
0x8910 Measured value
overrange
0x8920 Measured value
underrange
Tab. 9-29: Supported FSP_IO status codes for warnings (C2D)
The following table displays the status codes of the FSP_IO for the diagnostic
class error (C1D) that are supported by the S67-S3-BK-DI8-M8 Sercos field
bus coupler:
Bosch Rexroth AG
IDN/S-0-1303.0.10 „Diagnosis trace buffer no1"
enter
IDN/S-0-1303.0.11 „Diagnosis trace buffer no2"
enter
IDN/S-0-1303.0.12 „Diagnosis trace buffer no3"
enter
Description
General / unknown warning
Overload at an output channel
Short circuit (or overload) at an output channel
Overload or short circuit of the field supply
Interruption (no load) at an output channel
Wire break on an input or output channel
Undervoltage of the logic/sensor supply (V
Undervoltage of actuator supply (V
Value of the measuring and user range has been
exceeded at an input channel
Under-run of the measuring and user range at an
input channel
97/139
Sercos
Element 1
Element 2
...
Element n
...
Element 100
Element 1
Element 2
...
Element n
...
Element 100
Element 1
Element 2
...
Element n
...
Element 100
)
LS
)
A