58/139
Bosch Rexroth AG
Web-Based Management (WBM)
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
Fig. 8-10:
"Administration" page
Procedure for resetting the software:
1. If no administrator login has been performed, enter the administrator
password in the "Admin-Password" field in the "Software Reset" section.
2. To trigger a software reset, click the Software Reset button.
Procedure for resetting to the factory settings:
1. If no administrator login has been performed, enter the administrator
password in the "Admin-Password" field in the "Restore Factory Set‐
tings" section.
2. Then click the Restore Factory Settings button.
This also resets the IP address and as a result, the connection to the
field bus coupler may be lost after this reset.
DOK-CONTRL-S67S3BKDI8*-AP03-EN-P