Related Manuals for Bosch DIVAR IP all-in-one 6000
Summary of Contents for Bosch DIVAR IP all-in-one 6000
- Page 1 DIVAR IP all‑in‑one 6000 DIP‑6440IG‑00N | DIP‑6444IG‑4HD | DIP‑6448IG‑4HD | DIP‑644IIG‑4HD User manual...
-
Page 3: Table Of Contents
DIVAR IP all-in-one 6000 Table of contents | en Table of contents Safety Operating precautions Cybersecurity precautions Software precautions 1.3.1 Use latest software 1.3.2 OSS information Introduction System overview System setup Default settings Prerequisites First sign-in and initial system setup 4.3.1... -
Page 4: Safety
| Safety DIVAR IP all-in-one 6000 Safety Observe the safety precautions in this chapter. Operating precautions Notice! Intended use This product is for professional use only. It is not intended to be installed in a public area that is accessible to the general population. -
Page 5: Cybersecurity Precautions
State of California to cause birth defects and other reproductive harm. Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. -
Page 6: Software Precautions
Bosch assumes no liability whatsoever for any damage caused by operating its products with outdated software components. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/ 1.3.2 OSS information Bosch uses Open Source Software in the DIVAR IP all-in-one products. -
Page 7: Introduction
DIVAR IP all-in-one 6000 Introduction | en Introduction DIVAR IP all-in-one 6000 is an affordable and easy to use all-in-one recording, viewing, and management solution for network surveillance systems of up to 64 channels (with 8 channels pre-licensed). DIVAR IP all-in-one 6000 is a 1U rack mount unit that combines advanced Bosch Video Management System capabilities and state-of-the-art recording management into a single cost- effective, convenient to install and operate recording device for IT-minded customers. -
Page 8: System Overview
With the DIVAR IP System Manager application you can also upgrade the installed software. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/... -
Page 9: System Setup
DIVAR IP all-in-one 6000 System setup | en System setup Default settings All DIVAR IP systems are preconfigured with a default IP address and with default iSCSI settings: – IP Address: automatically assigned by DHCP (fallback IP address: 192.168.0.200). – Subnet mask: automatically assigned by DHCP (fallback subnet mask: 255.255.255.0). - Page 10 | System setup DIVAR IP all-in-one 6000 Click Accept to accept the license terms and wait until Windows restarts. This can take several minutes. Do not turn off the system. After restart, the Windows sign-in page is displayed. Set a new password for the administrator account BVRAdmin and confirm it.
-
Page 11: Choosing Operation Mode Bvms
DIVAR IP all-in-one 6000 System setup | en – Go to https://downloadstore.boschsecurity.com/. – Under the Software tab, select BVMS Appliances from the list, then click Select. A list of all available software packages is displayed. – Locate the ZIP files of the desired software packages, for example BVMS_[BVMS version]_SystemManager_package_[package version].zip, and save them to a... - Page 12 | System setup DIVAR IP all-in-one 6000 On the DIVAR IP - System setup page, select the operation mode iSCSI storage and the desired iSCSI storage version that you want to install, then click Next. The installation dialog box is displayed.
-
Page 13: Upgrading Software
Upgrading software With the DIVAR IP System Manager application you can upgrade the installed software on your system. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/ Notice! Downgrade of the installed software to an earlier version is not supported. - Page 14 | Upgrading software DIVAR IP all-in-one 6000 – In the column Available version, you see the later versions of the installed software applications. These versions were detected by the system on the Images drive or on a storage medium.
-
Page 15: Remote Connection To The System
DIVAR IP all-in-one 6000 Remote connection to the system | en Remote connection to the system You can make a remote connection to your DIVAR IP all-in-one system and access it from the internet. To create a remote connection, you must do the following: Protecting the system from unauthorized access, page 15 . -
Page 16: Remote Connection With Video Security App
Notice! This connection is only applicable for BVMS or VRM operation mode. To make a remote connection with Video Security App: In Apple’s App Store search for Bosch Video Security. Install the Video Security app on your iOS device. Start the Video Security app. Select Add. -
Page 17: Maintenance
7.2.2 Monitoring the system using the IPMI interface DIVAR IP all-in-one 6000 has a dedicated IPMI port on the rear side. You can use the IPMI interface to access, monitor, diagnose, and manage your DIVAR IP all-in- one 6000 system as a remote server. -
Page 18: Replacing A Faulty Hard Drive And Configuring A New Hard Drive
Replacing a faulty hard drive and configuring a new hard drive If a hard drive that is installed on your DIVAR IP all-in-one 6000 system is faulty, the respective hard drive tray LED is illuminated red. In this case, you must do the following: Replacing a faulty hard drive, page 18 . -
Page 19: Collecting Divar Ip System Manager Log Files
17 ). On the Windows Start menu, click Export System Manager Logs. The script exports the log files to the folder Documents\Bosch and creates a ZIP file with following name structure SysMrgLogs-[date]_[time]. You can use this ZIP file to attach it to the detailed error description. - Page 20 | Maintenance DIVAR IP all-in-one 6000 – OS system recovery only: This option will restore the OS partition with the factory default image and import existing virtual hard drives from existing video data partitions. This process might take up to 5 minutes.
-
Page 21: Additional Information
For more information, software downloads, and documentation, visit http:// www.boschsecurity.com and go to the respective product page in the product catalog. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/ Support services and Bosch Academy Support Access our support services at www.boschsecurity.com/xc/en/support/. - Page 22 | Additional information DIVAR IP all-in-one 6000 2022-10 | V01 | F.01U.408.604 Bosch Security Systems B.V. User manual...
- Page 24 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2022 Building solutions for a better life. 202210052104...
Need help?
Do you have a question about the DIVAR IP all-in-one 6000 and is the answer not in the manual?
Questions and answers