Installing Secure Router 2330/4134 Hardware Components; Navigation - Nortel Secure Router 4134 Installation Manual

.
Installing Secure Router 2330/4134
hardware components
The Secure Router 4134 ships with the fan tray installed, as well as
the power supply unit or units that you ordered. This section contains
instructions for installing hardware components, as well as instructions for
replacing a fan tray, power supply unit, and internal components.

Navigation

•
"Installing the interface modules" (page 56)
•
"Hot swapping interface modules" (page 61)
•
"Connecting Secure Router 2330/4134 power cables" (page 63)
•
"Connecting the console port cable" (page 67)
•
"Installing or replacing a Secure Router 4134 power supply module"
(page 69)
•
"Replacing a Secure Router 4134 fan tray module" (page 71)
•
"Installing or removing the internal VPN/IPSec module on the Secure
Router 4134" (page 72)
•
"Installing or removing an internal PVM on the Secure Router 4134"
(page 75)
•
"Replacing the DIMM in the Secure Router 4134" (page 81)
•
"Replacing the Secure Router 4134 internal Compact Flash" (page 86)
•
"Removing the Secure Router 2330 top cover" (page 88)
•
"Installing or removing the internal SCIM module on the Secure Router
2330" (page 89)
•
"Installing or removing the internal PVIM module on the Secure Router
2330" (page 91)
Nortel Secure Router 2330/4134
Installation — Hardware Components
NN47263-301 03.01 7 September 2009
Copyright © 2007-2008 Nortel Networks. All Rights Reserved.
55