Nortel Secure Router 4134 Installation Manual page 80

80 Installing Secure Router 2330/4134 hardware components
Procedure steps
Step
1
2
3
4
5
Action
Remove the two screws at the rear of the Secure Router 4134
that hold the service access panel secure. Remove these two
screws only. See the following figure.
Slide the access panel toward you until it is clear of the Secure
Router 4134.
Locate the PVM.
Release the latches that secure the PVM in the slot. There is a
release latch at both ends of the PVM slot. See the following
figure.
Firmly grasp the edges of the PVM and pull straight up to
remove the PVM from the slot.
Nortel Secure Router 2330/4134
Installation — Hardware Components
NN47263-301 03.01 7 September 2009
Copyright © 2007-2008 Nortel Networks. All Rights Reserved.