Nortel Secure Router 4134 Installation Manual page 84

84 Installing Secure Router 2330/4134 hardware components
2
3
4
5
6
Using the lever on the module, pull the module straight out of the
chassis slot.
Support the module as you remove it from the chassis by
grasping it by the edges.
Ensure you place the Mediation Server Module on antistatic
material if you lay it down to install a DIMM.
Always hold the module by its edges.
Locate the DIMM slot on the module.
The following figure shows the DIMM slots.
If the release latches on each end of the DIMM slot are engaged,
release the latches by pushing each latch away from the DIMM
slot.
Insert the DIMM in the slot, pushing down firmly but gently to
fully seat the DIMM in the slot.
The release latches close when the DIMM is properly installed.
Nortel Secure Router 2330/4134
Installation — Hardware Components
NN47263-301 03.01 7 September 2009
Copyright © 2007-2008 Nortel Networks. All Rights Reserved.