Table of Contents
Advertisement
12. Memory card B in-use indicator (Green)
Flashes during operation using the Memory card
slot B's memory card (hereinafter referred to as
Memory card B).
13. Memory card slot B
Insert the Memory card B in this slot.
14. Memory card slot B access indicator (Green)
Lights or flashes while writing a file to or reading a
file from the Memory card B.
15. DIP switch for maintenance
Used when conducting maintenance.
For settable functions, see p. 71, "MAINTENANCE
FUNCTION."
Note
When any of the switches is set to the ON position,
the unit is placed in maintenance mode, possibly
disabling broadcasts made by the contact control
or using the EV-700 Setting software.
Be sure to set all the switches to the OFF positions
after completing maintenance.
16. Reset switch
Reboots the unit when held down for 2 seconds
or more.
Note
Do not reset the unit while the Memory card slot
A access indicator (11) or Memory card slot B
access indicator (14) is lighting or flashing.
17. Card error indicator (Red)
Lights if any card error occurs.
18. Maintenance indicator (Orange)
Flashes while in Maintenance mode.
(See p. 71, "MAINTENANCE FUNCTION.")
19. Backup indicator (Green)
Goes off when the backup function is disabled.
Lights or flashes when the backup function is
enabled.
(See p. 89, "BACKUP FUNCTION.")
20. Streaming indicator
Not used.
21. LINK/ACT indicator (Green)
Lights when the unit is connected to a network
and flashes during data transmission or reception.
Tip
Lights or flashes synchronously with the LINK/
ACT indicator of the rear-mounted LAN terminal
(33).
22. Level meter
Indicates the audio output level during broadcast
or the audio input level during recording.
Red
Orange
Green
23. Menu key
Selects mode.
24. Mode indicator
Indicates the current operation mode (Lock mode,
Play mode, Recording mode, or Delete mode).
Green
Orange
25. Status display
Displays Program number, Phrase number,
setting content, or error information.
26. Play indicator (Green)
Lights during playback.
27. Recording indicator (Red)
Flashes during recording standby status or lights
during recording.
28. Monitor indicator (Orange)
Lights during monitor.
29. Up and Down keys
Selects Program number, Phrase number, or
Setting value.
30. Start/Stop key
Starts or stops the function according to each
mode.
31. Monitor key
Pressing this key while the unit is not making
playback recording, nor deletion places the unit in
monitor mode. The Monitor indicator lights during
monitor and monitor sound is output from the
Headphone output jack (3).
As monitor sound is not output from the Line
output terminals 1 and 2 of the Input/Output
terminal (40), you can monitor the audio signal
only on the headphones without broadcasting it
outside.
32. CPU RUN indicator (Green)
Flashes when the unit is working normally.
Lights or goes off if the unit malfunctions.
11
Advertisement
Table of Contents
