Toa EV-700 Instruction Manual page 70

All phrases playback
Repeatedly plays phrases contained in a memory card in the order of phrase numbers.
This playback system is suited for the broadcasts repeated all day such as BGM and fixed announcements.
• After the last phrase is played, playback returns to the first phrase and continues thereafter.
• Interval between phrases can be set in the range of 0 to 5 seconds (1-second units).
• Busy output ON/OFF during interval can be set.
• To stop playback, perform any of the following operations: Pressing the Start/Stop key (See p. 21.), Closing
the Stop control input terminals (See p. 33.), and Using the EV-700 Setting software. (See the EV-700
Setting software instruction manual.)
• The first phrase to be played can be designated.
• When a program is activated, the first phrase (designated phrase) is played.
Start
Playback
(Interval between
Phrases is settable.)
To Phrase 00001
Chime playback
This playback system is suited when the EV-700 is used as chime audio source of the remote microphone.
• Delay time is fixed at "0" second regardless of the unit setting.
• Busy output is not active regardless of the unit setting.
• Only 1 step is played.
Plays only 1 designated step.
(Example of playback operation)
70
Memory card
Phrase 00001
Phrase 00002
Phrase 00003
Phrase 32768
Start
Playback
Stop
Start
Step 1
When Phrase 00003 is designated as
the first phrase to be played
Phrase 00001
Phrase 00002
Phrase 00003
Start
Phrase 32768
Phrase 00002
Stop
Playback
Memory card
Phrase 00001
Phrase 00002
Phrase 00003
Phrase 32768