Table of Contents
Advertisement
20. ACQUIRING OPERATION HISTORY
You can download the operation history recorded in the unit to the Memory card B.
Note
You cannot download the history file to the Memory card B when the backup function is enabled.
2,4
Step 1. Confirm that the Lock mode indicator is lighting when the unit is standby for operation.
Step 2. Insert a memory card (option) into the Memory card slot B.
Step 3. Hold down the Monitor key for 3 seconds or more.
The "Log" indication flashes on the Status display, and the operation history will be downloaded to the
memory card B.
When the download is completed, the indication "done" appears on the Status display for about 3
seconds.
Step 4. Remove the Memory card B from the EV-700.
Step 5. Insert the Memory card B into a PC, then check the history using the EV-700 Setting software.
Tip
Operation history is downloaded in 2 formats having the same data, xml and csv.
The history file contents in either format can be confirmed using the EV-700 Setting software.
As for the csv format file, its contents can be confirmed without using the EV-700 Setting software.
[How to see history file in csv format]
1
No.
Item
1 History number
2 Date of history
3 Hours, minutes, and
seconds of history
4 History code
5 History content
80
2
3
A History control number. The larger the number, the latter history in time. The
history number would return to "0000000000" when it reaches an upper limit of
"9999999999."
Date information set to the EV-700 at the timing when history was recorded.
Time information set to the EV-700 at the timing when history was recorded.
Indicates category of history. History is grouped into 3 categories by a prefix
alphabet.
A: Action, V: Event, E: Error
Description of history.
1
Lock mode indicator
4
Description
Status display
3
5
Advertisement
Table of Contents
