Table of Contents
Advertisement
[(13) Operation of Sequential storage playback by a Pulse signal input activation]
Contact-activated input P002
Contact-activated input P003
Playback control input
Program playback
(Activation method)
Close the Playback control input terminal while the Contact-activated input terminal corresponding to the
program number to be played is being closed.
Similarly, close the Contact-activated input terminal and Playback control input terminal in sequence.
(Operation description)
Up to 16 activation inputs can be stored. The program corresponding to each input is played in the order of
entry. In the example above, P002 playback and P003 playback start in order.
If the Contact-activated input terminal corresponding to the same program is closed multiple times, these
activation inputs are stored by the same number of closures.
In this operation of Sequential storage playback, sequential playback is made regardless of the priority level
assigned to the program.
• To stop program during playback and automatically play the next program
Close the Stop control input terminal.
Stop control input
Program playback
P002 playback is interrupted, then the subsequent Program P003 playback will start.
Note
When set to the Spontaneous stop of phrase playback, the next program will be played after the phrase
playback in progress reaches its end.
• To clear all the stored inputs
Close the Delete/Clear control input terminal.
Delete/Clear control input
Program playback
Playback stops when P002 playback is complete and no subsequent programs are played.
P002 selection
P003 selection
Playback start Playback start
P002 playback
P003 playback
P001 playback P002 playback
ON
P001 playback
P002 playback P003 playback
Binary control
ON
P003 playback
P005 playback
Playback stops.
47
Advertisement
Table of Contents
