Emergency Playback (Using The Control Input Terminals); Making Emergency Playback - Toa EV-700 Instruction Manual

Digital announcer

Table of Contents

15. EMERGENCY PLAYBACK (USING THE CONTROL INPUT TERMINALS)

You can start or stop Emergency playback using each control input terminal in the rear-mounted Input/Output

terminal block.

(Rear)

15.1.1. When Pulse signal input activation is selected for the Emergency playback start setting

Step:

Close the Emergency playback control input terminals (Terminal No. 3).

Emergency playback will start.

Emergency playback will stop automatically after it is

repeated by the number of times or for the period of time,

both preset using the EV-700 Setting software.

Tips

• Emergency playback will automatically stop after

it is repeated by the set number of times even if you

continue to close the Emergency playback control input

terminals after Emergency playback has started. (See

p. 33, "Pulse signal input activation and Level signal

input activation.")

• For the method to stop Emergency playback in such cases

that the repeat count is set to "Infinite" (continuance), see

p. 57, "Stopping Emergency Playback."

Input/Output terminals

Table of Contents