Table of Contents
Advertisement
18.2. Adjusting the Whole Sound Volume (Use Switch 1.)
1, 3
1
Step 1. Set Switch 1 to the ON position.
The "PG.VoL" indication appears on the Status display.
Step 2. Press the Up and Down keys to adjust the whole sound volume of program.
The volume increases by 1 dB each time the Up key is pressed.
It decreases by 1 dB each time the Down key is pressed.
Tip
Pressing and holding the Up or Down key allows you to quickly select the whole sound volume.
Step 3. When you finish work, return Switch 1 to the OFF position.
Tip
The whole sound volume set through this work does not affect the microphone input volume and the line input
volume.
18.3. Playing, Recording, or Deleting Emergency Playback Audio Source (Use Switch 2.)
For details of operation, see p. 52, "EMERGENCY PLAYBACK (FRONT KEY OPERATION)."
2
3
4
5
6
7
8
2
73
Advertisement
Table of Contents
