Toa EV-700 Instruction Manual page 43

[(7) Recording operation by a Level signal input activation]
Recording control input
Contact-activated input 2
(Activation method)
Close the Contact-activated input terminal corresponding to the phrase number to be recorded while the
Recording control input terminal is being closed.
(Operation description)
When recording starts, audio source will be recorded to the Phrase No. 00002 as long as the Recording
control input terminal is closed.
Recording stops when the Recording control input terminal is opened.
Also, recording stops when the remaining recordable time reaches "0."
Note
You cannot perform any other operation until recording stops once started.
[(8) Operation of delete/clear by a Pulse signal input activation]
Delection control input
Contact-activated input 2
(Activation method)
Close the Contact-activated input terminal corresponding to the phrase number to be deleted while the
Deletion control input terminal is being closed.
(Operation description)
Starting the deletion causes deletion of the Phrase No. 00002 to start. The operation automatically stops
when the deletion has finished.
Note
Control input and key operation are disabled during deletion.
[(9) Forced stop operation by a Pulse signal input activation]
Contact-activated input 1
(Activation method)
Program playback currently in operation stops instantly when the Stop control input terminal is closed.
(Operation description)
P001 Playback starts by the contact-activated input signal and stops instantly when the Stop control input
terminal is closed during playback.
Note
Program playback cannot be started while the Stop control input terminal is being closed.
Phrase 00002 selection
Phrase recording
Phrase 00002 selection
Phrase deletion
Stop control input
Program playback
Recording start
Phrase 00002 recording
Deletion start
Phrase 00002 deletion
Stop activation
P001 playback
Direct control
43