Table of Contents
Advertisement
6. HANDLING OF MEMORY CARD
6.1. Usable Memory Card
Only the supplied memory card (1 GB) can be used for the unit. When optional cards are needed, purchase
them from your nearest TOA dealer.
We cannot guarantee the operation if other cards are used.
• The maximum recordable time is about 3 hours when a sampling frequency of audio sources is 44.1 kHz and
about 4 hours when it is 32 kHz.
• A memory card for the EV-350P or EV-350R cannot be used.
• The memory card format is FAT16.
6.2. Memory Card Handling Precautions
• Do not use the supplied memory card for equipment other than the EV-700, as this could lead to data damage
or less.
• Never touch the terminal pins on the memory card, as this could lead to data damage or less from static
electricity.
• Ensure no foreign objects such as dust or dirt get into the connector section to prevent poor contact.
• Do not store the unit in the following locations.
· Locations exposed to both high temperatures and high humidity
· Locations with a large temperature difference
· Locations with dust and dirt
· Locations where a shock or vibration is given
• Never give the unit a shock or vibration nor remove the card from the card slot during data writing or reading,
as this could lead to data damage or loss.
6.3. Memory Card Removal and Insertion
Detach the front cover, then insert or remove the memory card.
Detaching the front cover
2. Push down the tab.
3. Remove
the cover.
1. Unscrew when screwed.
(Not screwed by the factory
default.)
Note
The unit has 2 memory card slots. Do not remove
each card from or insert it into the slot while either
or both Access indicators are lighting or flashing.
Data on the card may be lost.
Inserting the memory card
into the card slot
Access indicators
Insert the card into the card slot.
Replace the front cover.
(Fix it with the supplied machine screws M3 x 12
as needed.)
Removing the memory card
from the card slot
1. Press the Eject button.
2. Pull out.
9
Advertisement
Table of Contents
