Backup Function; Enabling The Backup Function - Toa EV-700 Instruction Manual

28. BACKUP FUNCTION

Backup function allows the unit's operation to be maintained without interruption by switching the operating
Memory card A to the backup Memory card B if the Memory card A fails due to an error like read error.
Backup function ON/OFF setting can be made using the EV-700 Setting software.
The unit operates using the Memory card A only when the backup function is set to OFF. When the backup
function is set to ON, note that a memory card on which all the Memory card A data are recorded needs be
inserted into the Memory card slot B.
Therefore, be sure to make a backup copy of the Memory card A to the Memory card B in advance when
wishing to use this function. (See p. 75.)
By comparing both data on the Memory cards A and B using the EV-700 Setting software, you can check
whether they are identical or not.
See the EV-700 Setting software instruction manual for details.
Note
Even if an error occurs on the Memory card B during operation using the Memory card B, the unit's operation
will not automatically switch back to the operation using Memory card A. After removing the cause of the error
on the Memory card A, be sure to switch to the operation by hand.

28.1. Enabling the Backup function

Step 1. Insert the memory card (accessory) containing audio data into the Memory card Slot A.
Step 2. Insert another memory card (option) into the Memory card Slot B.
Step 3. Make a backup copy of the Memory card A to the Memory card B.
Use Switch 4 of the DIP switch for maintenance for this operation. (See p. 75, "Copying the Memory
Card (Use Switch 4.).")
Tip
You can also make a card copy using the EV-700 Setting software. (See the EV-700 Setting software
manual.)
Step 4. Enable the Backup function using the EV-700 Setting software, then transfer the Setting file to the EV-
700 unit.
(See the EV-700 Setting software manual.)
Step 5. Confirm that the Backup indicator is lighting.
Backup indicator
89