Table of Contents
Advertisement
10.4. Factory-Preset Program
• The following 8 audio files in the prerecorded audio files (See p. 104, "PRERECORDED AUDIO FILE LIST.")
are assigned to Program Nos. P001 through P008 by default.
These 8 audio files can be played without the need to create programs using the EV-700 Setting software.
For example, "2-tone chime" registered in Phrase No. 00001 is played when P001 is played.
• Phrase Nos. 00009 through 00016 are assigned to Program Nos. P009 through P016, respectively, although
sound source data are not registered in those phrase numbers.
If sound source data are recorded to Phrase Nos. 00009 through 00016, they can be played without the need
to create program using the EV-700 Setting software as in the case of the prerecorded audio files above.
For example, the data recorded to Phrase No. 00009 is played when P009 is played.
• Playback system is set to Program playback except "P008 Ascending 4-note tone," which is set to Chime
playback. (See p. 66, "PLAYBACK SYSTEMS.")
• When the prerecorded audio files registered to the Phrase Nos. 00001 through 00008 have been deleted
through the front key operation, you can record other audio files to those phrase numbers. In this case, they
can be played without the need to create program using the EV-700 Setting software as is the case described
above. The prerecorded audio files deleted in this method can be registered again from the memory card
using the EV-700 Setting software.
Program No.
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
18
Phrase No.
00001
2-tone chime
00002
Descending 4-tone chime
00003
Gong
00004
Yelp
00005
Attention please. The fire alarm is ...
00006
There is a fire. Please eva...
00007
Attention please. A few mi...
00008
Ascending 4-tone chime
00009
00010
00011
00012
Unregistered
00013
00014
00015
00016
Content of audio source
Advertisement
Table of Contents
