Table of Contents
Advertisement
14.2. Making Emergency Playback
Step 1. Set only Switch 2 to the ON position.
Confirm that the "EMEr" (EMER) indication appears on
the Status display.
Step 2. Press the Menu key to select Play mode.
Press the Menu key several times until the Play mode indicator
lights.
The "PLAY" indication appears for about 3 seconds on the
Status display, followed by the "EMEr" indication.
Tip
You can monitor the registered recorded contents only with
headphones prior to playback. (See p. 58, "Confirming
Audio Source Contents.")
Step 3. Press the Start/Stop key.
Emergency playback starts.
The Play indicator lights during playback, and the signal
level is displayed in the level meter.
Tip
You can stop the playback partway. (See p. 57, "Stopping
Emergency Playback.")
1
2
Displayed for 3 seconds.
ON
Flashing
3
4
5
6
7
8
ON
(PLAY)
(EMER)
55
Advertisement
Table of Contents
