Toa EV-700 Instruction Manual page 68

Step playback
Plays the phrases entered into the program one by one in the order of Steps by each activation. Once you set
the interval (phrase interval), phrases will be played at a fixed interval by one-time activation.
Operation differs depending on whether Interval is set to OFF or in the range of 10 seconds to 99 minutes.
[When the Interval is set to "OFF"]
• Playback stops after a single phrase playback is complete, and resumes from the phrase of the next step
when the activation is triggered again.
• When playback of the last phrase is complete, playback starts from the first step of the program by the next
activation.
• When stopping the playback by any of the following operations, it starts from the next step if the next activation
is triggered: Pressing the Start/Stop key (See p. 21.), Closing the Stop control input terminals (See p.
33.), and Using the EV-700 Setting software. (See the EV-700 Setting software instruction manual.)
• Playback will start from the first step in the following cases even if it is played partway through a program.
· When the first program is activated again while the second program activated during first program playback
is being played
· When the original program is activated again after power has been turned off during playback and on
• Monitor playback of the current Step will start when the Monitor key is pressed.
Step proceeds to the next one when monitor playback of that step is complete.
Plays the phrases one
by one in the order of
Steps by each activation.
To Step 1
(Playback operation)
Step 1
68
Program
Start
Step 1
Step 2
Step 3
Step 4
Playback
Phrase 00002
Step 2
Phrase 00002
Phrase 00001
Phrase 00003
Phrase 32768
: Start (Manually)
Playback
Phrase 00001
Step 3
Phrase 00003
Returns to Step 1.
Memory card
Phrase 00001
Phrase 00002
Phrase 00003
Phrase 32768
: Stop (Automatically)
Playback
Playback
Step 4
Phrase 32768