Table of Contents
Advertisement
18.7. Updating the Firmware (Use Switches 5 and 8.)
You can update the firmware using the memory card on which the latest firmware is recorded.
1
Step 1. Insert the memory card on which the latest firmware is recorded into the Memory card slot B.
Step 2. Set Switches 5 and 8 to the ON position.
The current firmware version appears on the Status display.
Step 3. Press the Start/Stop key.
The "rEAdy." indication appears on the Status display.
Step 4. Press the Start/Stop key.
Firmware update begins.
Copy progress is shown in percentage on the Status display during updating. ("**PCt")
The "uP.End" appears on the Status display when firmware update is complete.
Step 5. Return Switches 5 and 8 to the OFF position.
Step 6. Hold down the Reset switch for 2 seconds or more, or unplug the power supply cord on the rear panel,
then plug it again.
The unit restarts and the updated firmware is reflected to the unit.
76
2, 5
1
2
3
4
5
6
6
7
8
Status display
3, 4
Advertisement
Table of Contents
