Table of Contents
Advertisement
9. TRY TO USE FIRST
Various audio data are stored on the supplied memory card, which are called "Prerecorded audio files."
For the contents of prerecorded audio files, read "Prerecorded audio file list" on p. 104.
Program numbers are assigned to these 8 prerecorded audio files by default. They can be played readily in
default condition.
The table below shows the prerecorded audio files to which program numbers are assigned.
Program No.
P001
P002
P003
P004
P005
P006
P007
P008
Explained here is the procedure to play "2-tone chime" of the prerecorded audio files through the front key
operation.
Note
To play other prerecorded audio files than the 8 files listed above, programs need be created on the EV-700
Setting software.
(See the separate EV-700 Setting software instruction manual.)
Tip
Phrases 00009 through 00016 are assigned to Program Nos. P009 through P016, respectively, by default.
When you record audio sources in Phrases 00009 through 00016, you can play them without the need for
programming on the EV-700 Setting software.
9.1. Connections
Connect each device as shown below. After inserting the supplied memory card into the Memory card slot A,
connect the power source to the unit, then turn on the amplifier's power.
Use a single core or 2-core shielded cable for connection between the unit and the amplifier.
EV-700
For the detailed
connection,
see
p. 93.
14
Phrase No.
00001
2-tone chime
00002
Descending 4-tone chime
00003
Gong
00004
Yelp
Attention please. The fire alarm is indicating a fire. We're now
00005
investigating the cause. Please wait for a further information.
00006
There is a fire. Please evacuate as quickly as possible.
Attention please. A few minutes ago, we announced there may be a
00007
fire. However, this was a false alarm. Once again, there is no fire.
00008
Ascending 4-tone chime
[When using a single core
shielded cable]
To power amplifier
H
C
LINE OUT 1
Content of audio source
Line input terminal
Line output 1 terminal
[When using a 2-core
shielded cable]
To power amplifier
E
H
C
LINE OUT 1
Amplifier
For the connection between
the amplifier and speakers,
see each individual instruction
E
manual.
Speaker
Advertisement
Table of Contents
