Table of Contents
Advertisement
Step 7. Speak into the microphone or play the sound source by a player.
Tips
• Recording stops when the memory card becomes full.
• The active input of either the microphone input or line input is recorded.
• When both the microphone and line inputs are active, the input having
higher broadcast priority is recorded. Even if the input signal is lost
during recording, recording is not switched to the input having lower-
priority broadcast.
Step 8. To stop recording, press the Start/Stop key.
The Recording indicator goes off.
Tip
After you finish all necessary operations, it is recommended that you
place the unit in Lock mode to prevent accidental operation.
(See p. 27, "Disabling Each Key Operation on the Front Panel (Lock
Mode).")
24
Advertisement
Table of Contents
