Expose Cylinder - Stihl TS 700, TS 800 Service Manual

: Undo screws (arrows).
: Move choke lever (arrow) to top
position.
– Remove shroud.
– Reassemble parts in reverse
order.
TS 700, TS 800
7.5

Expose cylinder

Check and if necessary repair the
carburetor, air filter and ignition
system before looking for faults on
the engine.
Troubleshooting, see b 4
– Remove shroud, b 7.4
– Remove muffler, see b 7.1
1
: Unplug the spark plug boot (1)
from the spark plug.
1
2
: Remove ignition lead (1) and
short circuit wire (2) from the
retainers (arrows).
: Undo screws (arrows).
: Remove fan cover (1).
1
2
: Unscrew the screw (arrow) and
remove the ground wire (1).
: Unplug connector (2) from
ignition module.
– Remove the short circuit lead
from the wire guide on the ignition
side of the housing.
1
29