Stihl TS 700, TS 800 Service Manual page 80

: Turn the rod (1) and take it out of
the oblong hole in the throttle
shutter lever.
– Replace the rod.
– Reassemble parts in reverse
order.
Removal and installation of the
complete air flap rod
: Take out the screws (arrows) in
the upper and lower levers.
TS 700, TS 800
1
: Pull off the upper lever (1).
: Unhook and relax the torsion
spring (arrow).
: Use a suitable tool to prise the
lower lever (1) and torsion spring
off the air flap shaft.
1
Note the installed position when
removing and installing the torsion
spring (1).
– Reassemble parts in reverse
order.
Note:
Note adjustment of the air flap rod,
b 12.3.9, before fitting the lower
lever on the air flap shaft.
– Reassemble remaining parts in
reverse order.
1
2
1
79