System Operator And Personnel; Pertinent Laws, Standards, Directives, And Further Documentation; Declaration Of Conformity - Pepperl+Fuchs WHA-ADP Series Manual

WHA-ADP-*
Safety
1.0.2

System Operator and Personnel

The operator of the system is responsible in terms of planning, mounting, commissioning,
operating and maintenance.
Assembly, commissioning, operation, maintenance and dismounting of any devices may
only be carried out by trained, qualified personnel who have read and understood the
instruction manual.
1.0.3

Pertinent Laws, Standards, Directives, and further Documentation

Laws, standards, or directives applicable to the intended use must be observed. In relation
to explosive areas, Directive 1999/92/EC must be observed.
The corresponding data sheets, the declaration of conformity, the EC-type-examination
certificate and applicable certificates (see data sheet) are an integral part of this document.
You can find this information under www.pepperl-fuchs.com.
1.0.4

Declaration of Conformity

All products have been developed and manufactured taking into consideration applicable
European standards and regulations.
Note!
A Declaration of Conformity can be requested from the manufacturer.
The manufacturer of this product, Pepperl+Fuchs GmbH in 68307 Mannheim, Germany,
has a certified quality assurance system in conformity with ISO 9001.
ISO9001
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This Equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
6