WHA-ADP-*
Commissioning
4.4.4
Updating the DTM catalog
After you have installed the FDT base application and the new DTMs onto the computer, it
may be necessary to update the DTM catalog. In PACTware, the DTM catalog is called the
"device catalog" and is usually updated automatically when PACTware starts up.
If PACTware does not automatically update the device catalog, proceed as follows.
Updating the device catalog
1. Start PACTware.
2. Select View > Device catalog or press the F3 key or click the Device catalog icon on
the toolbar.
The Device catalog window opens.
3. Click the Update device catalog button to update the device catalog (view Figure 4.1
on page 35).
Figure 4.1: Device catalog in PACTware
4. Click Yes to confirm the next prompt.
The program then searches for recently installed DTMs (view Figure 4.2 on page 35).
The updated device catalog appears once the search has finished.
Figure 4.2: Search for DTMs in PACTware
35