Adjustment Of Wheel Axle Bearings Looseness - PRONAR T669 Operator's Manual

SECTION 5
DANGER
Before commencing work the user must read the instructions for lifting and adhere to the
manufacturer's instructions.
The lifting jack must be stably supported by the ground and so must the axle.
Ensure that trailer shall not move during inspection of bearing looseness of axles.

5.2.5 ADJUSTMENT OF WHEEL AXLE BEARINGS LOOSENESS

Preparation procedures
Prepare tractor and trailer for adjustment procedures according with
description provided in section 5.2.4.
FIG. 5.3 Adjustment of road wheel axle bearings
(1) hub cover, (2) castellated nut, (3) securing split cotter pin
Adjustment of road wheel axle bearings
Take off hub cover (1) - figure (5.3).
Take out split cotter pin (3) securing castellated nut (2).
Tighten castellated nut in order to eliminate looseness.
5.7
Pronar T669