HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
15.10 ^IPCFL–Set IPSTACK Static Parameters
15.10.1 Command Syntax
Command
^IPCFL=<parameter_id>,<value>
^IPCFL?
^IPCFL=?
15.10.2 Description
This command is used to set some parameters of the IPSTACK. It only support set the
value items 5, 10 and 12 now. The other parameters are not supported in currently.
Note:
15.10.3 Defined Values
<parameter_id>: the item which the command will to set.
<value>: the value the command will set the item to.
parameter_id
5
10
12
Issue 04 (2013-01-28)
When used the query command. The response will not contain the unsupported items.
value range (Unit)
1–100 (unit: 0.1s,
default value: 10)
1–1472(unit: 1Byte,
default value: 1024)
0,1(default value: 0)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Internet Service Commands
Possible response(s)
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
<CR><LF>^IPCFL: <parameter_id>,<value>
[<CR><LF>^IPCFL:
<parameter_id>,<value>[...]]<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>^IPCFL: <parameter_id>,(list of
supported <value>s),
<CR><LF>^IPCFL: <parameter_id>,(list of
supported <value>s),
...
<CR><LF><CR><LF>OK<CR><LF>
Description
The value of the transparent transmission
timer
The transparent transmission length
Trigger
The transparent transmission mode, see
the command ^IPENTRANS.
207