Cnum-Query Subscriber Number; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
<lac>: location area code
<ci>: cell id
<bsic>: base station Identify Code
<bcch_freq>: absolute bcch channel number.
<rxlevel>: rx signal level
<rxlevel_full>,<rxlevel_full>,<rxlevel_sub>,<rxqual>,<rxqual_full>,<rxqual_sub>,<idle
_ts>: to reserved. 0 or space.
Note:
14.6 +CNUM–Query Subscriber Number

14.6.1 Command Syntax

Command
+CNUM
+CNUM=?

14.6.2 Description

Action command returns the MSISDNs related to the subscriber (this information can
be stored in the SIM/UICC or in the MT). When storing information in the SIM/UICC, if
a SIM card is present or if a UICC with an active GSM application is present, the
information is stored in the EFMSISDN under DFTelecom. If a UICC with an active
USIM application is present, the information is stored in the EFMSISDN under
ADFUSIM). If subscriber has different MSISDN for different services, each MSISDN is
returned in a separate line. Refer subclause14.2 for possible <err> values.
Issue 04 (2013-01-28)
The response from <requested dump>=1 should be:
<CR><LF>+CCED:[<mcc>],[<mnc>],[<lac>],[<ci>],[<bsic>],[<bcch_freq>],[<rxlvel>]<[<rxlevel_f
ull>],[<rxlevel_sub>],[<rxqual>],[<rxqual_full>],[<rxqual_sub>],[<idle_ts>]><CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
[<CR><LF>+CNUM:
[<alpha1>],<number1>,<type1>[,<speed>,<service>[,<i
tc>]]]
[<CR><LF>+CNUM:
[<alpha2>],<number2>,<type2>[,<speed>,<service>[,<i
tc>]]
[...]]<CR><LF><CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>OK<CR><LF>
Network Service Commands
189