HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
15.10.4 Examples
The value of the transparent transmission timer is set to 0.2 seconds.
AT^IPCFL=5,2
OK
15.11 ^IPFLOWQ–TCP/UDP Flow Queries
15.11.1 Command Syntax
Command
^IPFLOWQ[=<link_id>]
^IPFLOWQ?
^IPFLOWQ=?
15.11.2 Description
The EXECUTION command is used to clear the specified TCP / UDP link packet
statistics.
The READ command
15.11.3 Defined Values
<link_id>: specifies the ID of the link. The value ranges from 0 to 5.
0: It‟s used to clear the statistics for all links in the execution command.
1–5: It specifies the link need to clear the statistical data.
<TX_FROM_USER>: an integer, specifying the amount of data received from user.
The maximum value is the (2
<TX_TO_SOCKET>: an integer, specifying the amount of data sent to socket. The
maximum value is the (2
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>^IPFLOWQ:
<link1>,<TX_FROM_USER>,<TX_TO_SOCKET>,<
TX_ACK_SUM>,<RX_FROM_SOCKET>,<RX_TO_
USER>
<CR><LF>^IPFLOWQ:
<link2>,<TX_FROM_USER>,<TX_TO_SOCKET>,<
TX_ACK_SUM>,<RX_FROM_SOCKET>,<RX_TO_
USER>
<CR><LF>
...<CR><LF>OK<CR><LF>
<CR><LF>^IPFLOWQ: (list of supported
<link_id>s)<CR><LF><CR><LF>OK<CR><LF>
is
used to query the current TCP / UDP link packet statistics.
32
-1) bytes.
32
-1) bytes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Internet Service Commands
208