Gprs Service Commands; Cgdcont-Set Pdp Environment; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
8.1 +CGDCONT–Set PDP Environment

8.1.1 Command Syntax

Command
+CGDCONT[=<cid>[,<P
DP_type>[,<APN>[,<PD
P_addr>[,<d_comp>[,<h
_comp>]]]]]]
+CGDCONT?
+CGDCONT=?

8.1.2 Description

The SET command specifies PDP context parameter values for a PDP context
identified by the (local) context identification parameter, <cid>. The number of PDP
contexts that may be in a defined state at the same time is given by the range returned
by the test command.
Issue 04 (2013-01-28)
8

GPRS Service Commands

Possible response(s)
<CR><LF>OK<CR><LF>
In case of error:
<CR><LF>ERROR<CR><LF>
<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h
_comp>
[<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h
_comp>[...]]<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>+CGDCONT: (list of supported
<cid>s),<PDP_type>,,,(list of supported
<d_comp>s),(list of supported <h_comp>s)
[<CR><LF>+CGDCONT: (list of supported
<cid>s),<PDP_type>,,,(list of supported
<d_comp>s),(list of supported
<h_comp>s)[...]]<CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPRS Service Commands
111