Examples - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Note:
<ecio>: the value ranges from –15 to 0. Returns the Ec/Io value. It is a negative.
Note:
<rscp>: received Signal Code Power. Return the RSCP value. It is a negative. The
unit is dBm.
Note:
<lac>: location area code, the value displays hexadecimal.
<cell_id>: cell ID, the value displays hexadecimal.
<neighbour_cell_num>: number of neighbour cells. It equals 0 means cannot get any
neighbour cell, maybe because of the network environment.
0–6: It supports to maintain six neighbour cells at most.
<neig_psc1>...<neig_psc6>: Primary scrambling code of neighbour cells.
0–65535: primary scrambling code of neighbour cells.
Note:

14.7.4 Examples

AT^NWINFO
^NWINFO: 84,0,0,1,405,-7,-113,0x2513,0xe0195,0,0,0,0,0,0,0
OK
Issue 04 (2013-01-28)
It returns primary scrambling code at WCDMA mode but cell id at GSM mode.
It only supports to query base station information at WCDMA mode now, and returns 0 at GSM
mode.
It only supports to query base station information at WCDMA mode now, and returns 0 at GSM
mode.
It returns primary scrambling code at WCDMA mode but cell id at GSM mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Service Commands
193