Clip-Report Of Calling Line Identification; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Note:
10.4 +CLIP–Report of Calling Line Identification

10.4.1 Command Syntax

Command

10.4.2 Description

An unsolicited report will be sent to TE every 5 seconds if +CLIP is enabled by the set
command of CLIP.

10.4.3 Defined Values

<number>: „0‟–„9‟, „*‟, „#‟,‟+‟ in the form of ASCII code value. If receive a voice call with
number withhold, only quotation will be displayed.
<type>: type of address octet in integer format. 145 means international address.
Refer to the detail instruction of <type_addr> at "+CMGS".
<CLI validity>:
0: CLI valid
1: CLI has been withheld by the originator.
2: CLI is not available due to inter-working problems or limitations of originating
network.

10.4.4 Examples

<CLI validity>=0 the unsolicited report will be
+CLIP: "82882690",129,,,,0
<CLI validity>=1 the unsolicited report will be
+CLIP: "",128,,,,1
<CLI validity>=2 the unsolicited report will be
+CLIP: "",128,,,,2
Issue 04 (2013-01-28)
The "AT+CLIP" is the same as "AT+CLIP=0".
Possible response(s)
<CR><LF>+CLIP: <number>,<type>,,,,<CLI validity><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Supplementary Service Commands
150