HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
13.9 ^ANTDTCT–Query the Status of ANTDET
13.9.1 Command Syntax
Command
^ANTDTCT?
13.9.2 Description
This command used to query the status of ANTDET which is connected to the
antenna.
13.9.3 Defined Values
<stat>: the logic value of ANTDET.
0: The antenna is connected.
1: The antenna is disconnected.
13.10 ^ANTDTCT–Indicate the Status of ANTDET When
It Changes
13.10.1 Command Syntax
Command
13.10.2 Description
This command is used to report the status of ANTDET when the status changes.
13.10.3 Defined Values
<stat>: the logic value of ANTDET
0: The antenna is connected.
1: The antenna is disconnected.
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>^ANTDTCT: <stat><CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>ERROR<CR><LF>
Possible response(s)
<CR><LF>^ANTDTCT:<stat><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Control Commands
181