Appendix 4 Summary Of Final Result Codes; Appendix 5 List Of Initial Values Of Command Parameter After Ms First Powerup - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
10
11
12
13
command is unavailable)
14
15
16
17
18
19

17.4 Appendix 4 Summary of Final Result Codes

Final result code
OK
CONNECT
RING
NO CARRIER
ERROR
BUSY
NO ANSWER
+CME ERROR: <err>
+CMS ERROR: <err>
TOO MANY PARAMETERS
17.5 Appendix 5 List of Initial Values of Command
Parameter After MS First Powerup
The following table presents the initial values of interface parameters mentioned
herein at the time of MS first startup (upgrade or factory initial value).
Issue 04 (2013-01-28)
Memory error (communication with database of SMS is faulty)
Invalid memory index number <index>
Memory is full
SMSC error (message contains no SCA, or the SCA set via the CSCA
No network service is available
Network timeout
No status of new SM, error execute this command
Unknown error
invalid text mode parameter
SMSC address unknown
Code
0
1
2
3
4
7
8
Numbering mode is not
supported
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
It indicates a command line is executed
correctly.
Connection established
Incoming call
Connection terminated
Ordinary error
Opposite party busy
Connection completion timeout, no
answer
Error type is specified by the parameter
<err>
SMS-related error
Too many parameters in the issued
command
Appendixes
221