Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Command
+CPMS?
+CPMS=?

6.10.2 Description

The SET command is used to set the message storage media corresponding to the
message read/write operations, and return the current use state of the selected media.
The READ command returns the name and use state of the currently selected media.
The TEST command returns all the media types supported by the MS.
Note:

6.10.3 Defined Values

<mem1>: string value. It indicates the media for use of reading and deleting
messages. Optional values are:
"SM": Which means the (U)SIM card (default value).
"ME": Which means NV.
"SR": Indicates the status report storage place in (U)SIM card (reserved, not
supported currently).
<mem2>: string value. It indicates the media for use of writing and sending messages.
Optional values are:
"SM": Which means the (U)SIM card (default value).
"ME": Which means NV.
<mem3>: string value. It indicates the media for use of storing the received message.
The optional values are the same as those of <mem2>.
<total1>: integer value. It indicates the total number of messages that can be saved in
<mem1>.
Issue 04 (2013-01-28)
The third parameter of +CPMS command is stored in NV automatically when +CPMS command
executes, the other two are not. So after module resets, only the third value is the same as user
set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>+CPMS:
<mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3><CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CMS ERROR: <err><CR><LF>
<CR><LF>+CPMS: (list of supported <mem1>s),(list of
supported <mem2>s),(list of supported <mem3>s)
<CR><LF>
<CR><LF>OK<CR><LF>
Short Message Service Commands
81