Cmt-Report New Message Indication Directly; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
6.5 +CMT–Report New Message Indication Directly

6.5.1 Command Syntax

Command

6.5.2 Description

Received new messages are not stored, but reported to TE directly.

6.5.3 Defined Values

<reserved>: reserved.


The details about this parameters refer to the +CMGS command.
Issue 04 (2013-01-28)
Possible response(s)
If PDU mode (+CMGF=0):
<CR><LF>+CMT:
[<reserved>],<length><CR><LF><pdu><CR><LF>
If TEXT mode (+CMGF=1):
<CR><LF>+CMT:
<oa>,[<reserved>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<t
osca>,<length>]<CR><LF><message in text><CR><LF>
PDU mode:
<length>: integer value, which indicates the number of bytes of PDU data.
<pdu>: protocol data unit. Its format is the same as defined in section "Message
list command".
TEXT mode:
<oa>: Originating-Address.
<scts>: Service-Centre-Time-Stamp.
<tooa>: Type-of-Originating-Address.
<fo>: First-Octet.
<pid>: Protocol-Identifier.
<dcs>: Data-Coding-Scheme.
<sca>: Service-Center-Address.
<tosca>: Type-of- Service-Center-Address.
<length>: length of user data.
<message in text>: user data.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Short Message Service Commands
71