Csta-Select Type Of Address; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Notes:
9.7 +CSTA–Select Type of Address

9.7.1 Command Syntax

Command
+CSTA[=<type>]
+CSTA?
+CSTA=?

9.7.2 Description

The SET command selects the type of number for further dialing commands (D)
according to GSM/UMTS specifications. Test command returns values supported a
compound value.

9.7.3 Defined Values

<type>: type of address octet in integer format (TS 24.008)
145: When dialing string includes international access code character "+".
129: Otherwise (default value)
Note:
Issue 04 (2013-01-28)
 This execution of the command will not affect data calls.
 For hanging up in the multi-party call , AT+CHLD is suggested.
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>ERROR<CR><LF>or
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CSTA: <type><CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF> ERROR<CR><LF>or
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CSTA: (list of supported <type>s)<CR><LF>
<CR><LF>OK<CR><LF>
AT+CSTA is the same as AT+CSTA=129.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Call Control Commands
133