Description; Defined Values; Cpbw-Write Phonebook; Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

12.5.2 Description

This command returns the phonebook entries between positions index1 and index2 in
the currently selected phonebook memory. If no entry exists between index1 and
index2, the following will be returned:
+CME ERROR: not found
Alternatively, you can input index1 only, and only the phonebook entries in the position
index1 will be returned.
The TEST command returns the position range of the currently selected phonebook
memory, and the maximum length of <number>, <text> and <email>.

12.5.3 Defined Values

<index1>, <index2>, <index>: integer value. It indicates the position in the phonebook
memory. The values of index1 and index2 are less than or equal to the "total" field
returned by the "+CPBS?" command.
<number>: string type, telephone number.
<type>: number type: "145" means an international call. For the specific values, see
also the definition of the "type_addr" parameter in the SC number, as described in the
section "Short message sending +CMGS".
<text>: string type. It indicates a name. In case coding=1, it indicates that the <text> is
a hexadecimal text value of the original data.
<coding>: coding scheme. It means the character code of the <text> field, and
specifies the language.
0: GSM 7 bit Default Alphabet
1: UCS2 (namely, upload the <text>in the format of original data).
<nlength>: integer value. It indicates the maximum length of the telephone number.
<tlength>: integer value. It indicates the maximum length of the name.
12.6 ^CPBW–Write Phonebook

12.6.1 Command Syntax

Command
^CPBW=<index>
[,<number>[,<type>[,<text>,
<coding>]]]
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Phonebook Commands
170