Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
A special form of the set command, +CGEQREQ= <cid> causes the requested profile
for context number <cid> to become undefined.
The READ command returns the current settings for each defined context.
The TEST command returns values supported as a compound value. If the MT
supports several PDP types, the parameter value ranges for each PDP type are
returned on a separate line.

8.3.3 Defined Values

<cid>:
1–16: Index value of PDP setting environment. Other PDP-related commands can be
used for invoking the storage position through this index value.
<PDP_type>: string value. It indicates the type of the packet switching protocol.
"IP": IP protocol
"PPP": Point-to-Point protocol
<Traffic class>: a numeric parameter that indicates the type of application for which
the UMTS bearer service is optimised.
0: Conversational
1: Streaming
2: Interactive (default value)
3: Background
4: Subscribed value
If the Traffic class is specified as conversational or streaming, then the Guaranteed
and Maximum bitrate parameters should also be provided. Other values are reserved.
<Maximum bitrate UL>: a numeric parameter that indicates the maximum number of
kbits/s delivered to UMTS (up-link traffic) at a SAP. As an example a bitrate of 32kbit/s
would be specified as '32' (e.g. AT+CGEQREQ=...,32, ...). This parameter should be
provided if the Traffic class is specified as conversational or streaming. The default
value is 0.
<Maximum bitrate DL>: a numeric parameter that indicates the maximum number of
kbits/s delivered by UMTS (down-link traffic) at a SAP. As an example a bitrate of
32kbit/s would be specified as '32' (e.g. AT+CGEQREQ=...,32, ...). If the parameter is
set to '0' the subscribed value will be requested. This parameter should be provided if
the Traffic class is specified as conversational or streaming. The default value is 0.
<Guaranteed bitrate UL>: a numeric parameter that indicates the guaranteed number
of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided that there is data to
deliver). As an example a bitrate of 32kbit/s would be specified as '32' (e.g.
AT+CGEQREQ=...,32, ...). If the parameter is set to '0' the subscribed value will be
requested. This parameter should be provided if the Traffic class is specified as
conversational or streaming. The default value is 0.
<Guaranteed bitrate DL>: a numeric parameter that indicates the guaranteed number
of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided that there is data
to deliver). As an example a bitrate of 32kbit/s would be specified as '32' (e.g.
AT+CGEQREQ=...,32, ...). If the parameter is set to '0' the subscribed value will be
Issue 04 (2013-01-28)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPRS Service Commands
119