Internet Service Commands; Ipinit-Initialize A Tcp/Udp Connection; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
15.1 ^IPINIT–Initialize a TCP/UDP Connection

15.1.1 Command Syntax

Command
^IPINIT=<APN>[,<user_name>[,
<password>[,<ip_addr>[,<auth_t
ype>]]]]
^IPINIT?
^IPINIT=?

15.1.2 Description

This command initializes a TCP/UDP connection. After initialization is complete, a
local IP address is obtained, enabling the next step to be performed, for example,
enabling a TCP connection and transmitting UDP data.
In case of using the command without <user_name> and/or <password>, the user
name and password that have been set by running the PPPCFG command are used.
During the execution command running, the command can be interrupted.
Issue 04 (2013-01-28)
15

Internet Service Commands

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Internet Service Commands
Possible Response(s)
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
If initialization is performed:
<CR><LF>^IPINIT:
<state>,<ip_address>,<APN>,<pri_dns_addres
s>,<sec_dns_address><CR><LF>
<CR><LF>OK<CR><LF>
If initialization is not performed:
<CR><LF>^IPINIT: 0<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>^IPINIT: (list of supported
<state>s)<CR><LF>
<CR><LF>OK<CR><LF>
194