Disposal Of Bender Devices; Safety - Bender ISOMETER isoCHA425HV Manual

General information
1.9

Disposal of Bender devices

Abide by the national regulations and laws governing the disposal of this device.
For more information on the disposal of Bender devices, refer to
www.bender.de > service & support.
1.10

Safety

If the device is used outside the Federal Republic of Germany, the applicable local standards and regulations
must be complied with. In Europe, the European standard EN 50110 applies.
DANGER
Touching live parts of the system carries the risk of:
• Risk of electrocution due to electric shock
• Damage to the electrical installation
• Destruction of the device
Before installing the device and before working on its connections, make sure that the installation
has been de-energised. The rules for working on electrical systems must be observed.
8 isoCHA425HV_D00404_04_M_XXEN/10.2023
Risk of fatal injury due to electric shock!