Kts Truck; Diagnosis Panel; Connection Panel; Led A And Led B Status Display - Bosch KTS Truck Original Instructions Manual

en 20 | KTS Truck | Description of unit
3.5

KTS Truck

3.5.1

Diagnosis panel

Fig. 1: Diagnosis panel
1 OBD diagnostic cable connection (DIAG)
3.5.2

Connection panel

12/24 V DC
1
Fig. 2: Connection panel
1 Connection for adapter cable with battery clips or connecting
cable for cigarette lighter socket
2 LED A and LED B (refer to Section 3.5.3)
3 USB connection
|
1 689 989 100 2013-03-11
DIAG
459899-01_Ko
1
USB
A B
459899-02_Ko
2 3
3.5.3

LED A and LED B status display

Status LED A
KTS Truck ready Off
for operation
Data communica- Flashing green
tion with control (irregular)
unit
Firmware update Off
in progress
Hardware/ Green light
firmware update
problem
LED A Function
Off No data communica-
tion with control unit
Flashing green Data communication
(irregular) with control unit
Red light Power supply > 37 V
LED B Function
Off No power supply
Flashing green KTS Truck ready for
(1-second fre- operation
quency)
Green light Hardware/firmware
problem
Flashing yellow Power supply > 37 V
(1-second fre-
quency)
Yellow light Hardware/firmware
problem
Flashing red Firmware update
(irregular) in progress
Red light Firmware update
problem
*)
Unplug USB connection and power supply and plug in again.
Contact customer service if the problem persists.
LED B
Flashing green
(1-second
frequency)
Flashing green
(1-second
frequency)
Flashing red
(irregular)
Red light
Action
Check connection
to control unit
None
Check voltage
in vehicle
Action
Check power
supply
None
*)
*)
*)
None
Repeat firmware
update
Robert Bosch GmbH