Evacuation Of The Reusable Canister System - Atmos S 61 Operating Instructions Manual

4.0 Operation
Refilling storage canister for hose rinsing

4.2.3 Evacuation of the reusable canister system

The canister system must be cleaned and disinfected at regular intervals. See details in chapter
6.0 "Hygiene plan".
A) Manually
Empty the secretion canister when it is approximately half-full.
Remove the secretion canister horizontally from the bracket in the service compartment and
remove the suction hose.
B) Automatically (530.1070.0)
The secretion canister is emptied automatically when the filling level is reached.
Mount secretion canister
The hose connection with intake ensures a smoother
liquid surface.
Thereby a lower foam formation and prolonged filter
durability are the result.
A) Fully automatic refilling (530.1060.0)
If required, the water storage canister will be automatically refilled.
Attention: Make sure that the water supply system is on and the water supply
secured! Do not use any foaming cleaning agents or disinfectants.
B) Manual refilling (530.1050.0)
Fill the canister with water and/or a non-foaming instrument disinfectant.
Intake for foam
prevention
Suction hose (only for
automatic)
006.0008.0, 220mm
Hose connection (grommet)
340.0057.0
Secretion canister lid
530.1108.0
Seal
320.0013.0
Bacterial filter
340.0054.0
Splash guard
312.0827.0
Secretion canister
15