Clipboard Endoscopy; Option Led Light Cube; Option Endoscope Management (Heated); Hook For The Headlight With Automatic Switching - Atmos S 61 Operating Instructions Manual

4.0 Operation
Screwing in the adapter
Clipboard with connected light conductors
Operating the control panel
Clipboard with connected headlight

4.9 Clipboard endoscopy

Integration of 3-channel endoscope management for rigid
and flexible endoscopes.

4.9.1 Option LED Light Cube

The LED Light Cube is automatically activated when the unit
is switched on.
With a simple rotary motion the adapters are screwed in
up to the stop position and fixed in the Clipboard. The light
conductors can be plugged into the connection. The light
channel is automatically activated when the light conductor
is removed from the support. Manual on and off switching
of the light channels by means of the control panel is also
possible.

4.9.2 Option endoscope management (heated)

Endoscope heating is activated automatically when the unit
is switched on. The quivers are heated to 41°C.
4.9.3 Hook for the headlight with automatic
switching
The headlight can be easily removed and put back during
the examination. Connect the headlight to the clipboard
as described in chapter 4.8.1. Always use the right light
channel. This light channel is then automatically activated
when the headlight is removed from the hook.
In order to guarantee error-free operation, seal the light
barrier of the right light channel with the provided blind plug.
25