3.0 Setting up and starting up
3.4 Waste water drain
Prerequisites:
• Permanently installed connection fitting with G3/4" external thread or
• Drain outlet, standard HT 40 or HT 50 (connection adapters can be ordered for the adoption of the discharge hose:
510.2130.0 for HT 40; 510.2129 for HT 50) or
• Conical connection for 1/2" hose inner diameter
• Connection height; approx.15 cm
• Distance from the wall connection to the installation site: < 3 m
An anti-syphon trap is integrated in the unit!
• Connect waste water hose with unit and the G3/4" connection fitting. Thereby fit enclosed gaskets into the screwing.
3/4" wall connection
Standard HT
Conical hose connection
3.5 Setting up proposal
1730
250
740
445
1961
979,5
2940
10