3.0 Setting up and starting up
3.7 Rear view
3.8 Assembly of secretion canister
Prior to use, check the system for leak tightness, otherwise it is possible that the vacuum cannot built up!
Insert bacterial filter (
4
)
into splash guard (
5
)
Connect hose to grommet
(
1
)
3.8.1 Mount secretion canister
Intake for foam prevention:
The hose connection with intake ensures a smoother
liquid surface.
Thereby a lower foam formation and prolonged filter
durability are the result.
12
Plug the power cable into the IEC power socket.
Please observe the safety instructions on page 7!
Insert splash guard into
lid
Insert grommet into lid
7
Suction hose (only
for automatic)
006.0008.0, 220 mm
Insert suction hose (
7
)
Insert the canister
horizontally into both
connections
Insert the seal (
3
),
attach lid to canister (
6
)
Fix hose to retainer clip
Hose connection (grommet)
340.0057.0
Secretion canister lid
2
530.1108.0
Seal
3
320.0013.0
Bacterial filter
4
340.0054.0
Splash guard
5
312.0827.0
Secretion canister
6
1