YASKAWA Sigma-7-Series Product Manual page 151

Parameter
Name
No.
Output Signal Selec-
2
tions 3
/NEAR (Near Output) Signal Allocation

n. X
Pn510
 
n. X Reserved parameter (Do not change.)
 
n. X Reserved parameter (Do not change.)

n.X Reserved parameter (Do not change.)
Setting Setting
Range Unit
0000h to
–
0666h
0 Disabled (the above signal output is not used).
1 Output the signal from the CN1-1 or CN1-2 output terminal.
2 Output the signal from the CN1-23 or CN1-24 output terminal.
3 Output the signal from the CN1-25 or CN1-26 output terminal.
4 to 6 Reserved setting (Do not use.)
6.2 List of Servo Parameters
Continued from previous page.
Default Applicable When
Setting Motors Enabled
After
0000h Rotary
restart
Continued on next page.
Classi- Refer-
fication ence
Setup *1
6
6-21