Dr 5 - Module Number; Dr 5 - Port Parameters; Dr 5 - Display Model; Table 5-2 Allocation Of Dr 5 - Siemens Siwarex U Device Manual

4BWEIGHING FUNCTIONS
Assignment LED1
Assignment LED2
Reserve
Table 5-2 Allocation of DR 5
5.4.1 DR 5 – module number
Each module can be assigned a number. With SIWAREX U modules with order
number 7MH4601... and when using SIWATOOL U Version 1.7, the number of the
module is checked against the number saved in the SIWAREX module while
establishing an online connection. Establishing a connection is only possible when
the number in SIWATOOL U matches that of the module or when the number "0" is
specified.
This module number only serves information purposes from SIWATOOL U Version
2.0 on or for modules with order number 7MH4950.... The online connection is
established in every case.
5.4.2 DR 5 – port parameters
The setting of port parameters is only possible to a limited degree. This setting is
valid both for the RS232 port and the TTY port. The baud rate is fixed at 9600 bit/s.
Bit no.
0
1
2 - 7
5.4.3 DR 5 – display model
The Siebert remote display Model S102 can be connected to the SIWAREX U
module via the TTY port. Dependent on the number of display elements,
corresponding codes are allocated.
Code (dec)
5-34
BYTE 1 101
BYTE 1 102
BYTE 1 0
6
reset
with parity bit (default)
parity even (default)
reserve
Meaning
0 no display
1 4-digit display Siebert display
2 5-digit display Siebert display
3 6-digit display Siebert display
Code Status information
100 Channel error
101 Limit value 1
102 Limit value 2
103 Scale adjusted
200 Channel error
201 Limit value 1
202 Limit value 2
203 Scale adjusted
100 Channel error
Reserve
set
without parity bit
parity odd
Channel no.
Channel 1
Channel 1
Channel 1
Channel 1
Channel 2
Channel 2
Channel 2
Channel 2
Channel 1
SIWAREX U