Shooting And Recording/Playback Functions Section; Shooting And Recording (Camera Unit) - Panasonic AJ-CX4000G Operating Instructions Manual

Chapter 2 Description of Parts — Shooting and recording/playback functions section

Shooting and recording/playback functions section

Shooting and recording (Camera unit)

1 <SYNCHRO SCAN> button
Adjusts the shutter speed of synchro scan in the synchro scan mode.
Pressing the <−> button slows down the shutter speed. Pressing the <+> button increases the shutter speed.
For example, when shooting a computer monitor, adjust to a position where the noise for the horizontal bar in the viewfinder will be reduced.
2 <CC FILTER>/<ND FILTER> dial
Select the filter to suit the luminance or color temperature of the subject.
Position of <CC FILTER>
dial (large diameter)
<A>
<B>
<C>
<D>
Position of <ND FILTER>
dial (small diameter)
<1>
<2>
<3>
<4>
Refer to the following table to switch the <CC FILTER> and <ND FILTER> dials according to the shooting conditions.
Shooting conditions
Sunset, sunrise, inside studio
Outdoors in the clear skies
Outdoors under cloudy skies or in the rain
Clear, bright scenery such as snowy scenery,
tall mountains, seaside
3 Focal plane index < >
Indicates the focal plane of the MOS sensor.
Use this mark as a reference for measuring the accurate focal distance from the subject.
4 USER button
The function selected by the user can be assigned to the <USER 1> to <USER 5> buttons. Pressing the USER button performs the assigned
function.
5 <SHUTTER> switch
Switches the electronic shutter.
<OFF>: Disables the electronic shutter.
<ON>: Enables the electronic shutter.
<SEL>: Changes the shutter speed.
It is a spring switch. Shutter speed is changed each time pressed toward the <SEL> side.
1
2
3
4
5
6
Setting
<3200 K> Sets the color temperature to 3200 K.
<4300 K> Sets the color temperature to 4300 K.
<5600 K> Sets the color temperature to 5600 K.
<6300 K> Sets the color temperature to 6300 K.
Setting
<CLEAR> Does not use the ND filter.
<1/4ND> Reduces the amount of light entering the MOS sensor to 1/4.
<1/16ND> Reduces the amount of light entering the MOS sensor to 1/16.
<1/64ND> Reduces the amount of light entering the MOS sensor to 1/64.
<CC FILTER> dial
<A> (<3200 K>)
<B> (<4300 K>) or <C> (<5600 K>) or <D>
<D> (<6300 K>)
<B> (<4300 K>) or <C> (<5600 K>) or <D>
4
7 8 9 10
Description
Description
(<6300 K>)
(<6300 K>)
– 25 –
<ND FILTER> dial
<1> (<CLEAR>)
<2> (<1/4ND>) or <3> (<1/16ND>)
<1> (<CLEAR>) or <2> (<1/4ND>)
<3> (<1/16ND>) or <4> (<1/64ND>)